Operating table
Stern OT-4
Electric operating table Stern OT-4 is designed for general surgical operations, when using additional options, it can be used in neurosurgery, orthopedics, gynecology, proctology, etc. The metal parts of the table are made of stainless steel, which makes it easier to clean and disinfect the table. The operating table is equipped with anti-bedsore mattresses with the function of preserving the shape.
The longitudinal shift function of the panel allows to use a mobile X-ray machine with a C-arm without needing to reposition the patient or to reverse the positioning of the patient. Optionally, the operating table can be equipped with a two-layer panel, which makes it possible to easily place cassettes for X-ray examinations under the patient. Built-in rechargeable battery provides smooth operation of the table.
Electric operating table Stern OT-4 can additionally be equipped with body belts, additional supports, head rests, infusion racks and other options.
Physical characteristics of the device
Number of sections | 5 |
Table length, mm | 2100 |
Table width with sliding rails, mm | 600 |
Dimensions of table working surface, mm | 2100×550 |
Cross section of side sliding rails (mm) | 8×29 |
Table height without mattress, (mm) max min | 880 650 |
Net weight (kg) | 280 |
Gross weight (kg) | 310 |
Safe working capacity (kg) | 135 |
Dimensions of head section, mm | 250×550 |
Dimensions of back section, mm | 600×550 |
Dimensions of pelvic section, mm | 520×550 |
Dimensions of the item of leg plate, mm | 550×270 |
Dimensions of arm support, mm | 550×150 |
Dimensions of table base, mm | 1005×505 |
Removable mattress, pillow thickness (mm) | 70 |
Number of wheels | 4 |
Wheel diameter, mm | 67 |
Functional characteristics of the device
Drive | changing the height of table working surface | electromechanical |
side slope of table working surface | electromechanical | |
longitudinal slope of table working surface | electromechanical | |
changing the angle of back section | electromechanical | |
changing the angle of leg plate | mechanical | |
changing the angle of head plate | mechanical | |
adjustment of arm support | mechanical | |
central brake | mechanical | |
changing the height of kidney roller | mechanical | |
Table height adjustment range, (mm) | 230 | |
Longitudinal tilt Trendelenburg anti-Trendelenburg position | 30˚ 30˚ | |
Lateral (side) tilt | ± 15˚ | |
Longitudinal shift (± 2%), mm | ≤300 | |
Automatic return of the table working surface to its original position | no | |
Kidney bridge | ≤120 | |
Using an X-ray machine with a C-shaped tripod | yes |
Power supply
Voltage | 220V |
Frequency | 50Hz |