Main page
Request for a commercial offer
Send message Order a callback Application for equipment
 

Gynecological chair-bed
Welle B04

  • Gynecological chair-bed Welle B04

Send a request
to clarify the cost,
terms and delivery terms Welle B04


Update

Color options
Color options

 

 

Welle B04 is a multifunctional obstetric table.

The possibility of carrying out resuscitation measures
Electromechanical adjustment of height, position of the dorsal and pelvic sections
Alternative use as an operating table
Removable leg section
Removable, adjustable side rails
The presence of side tires for additional attachments

Technical characteristics

Table driveElectric, LINAK®
Number of bed sections3 sections
Back section change driveElectromechanical
Back section tilt angle, degree-5 ~ 70
Actuator for changing the position of the bed of the bed (position Trendelenburg / anti-Trendelenburg)Electromechanical
Angle of changing the position of the bed of the bed (position Trendelenburg / anti-Trendelenburg), degree0 ~ 15
Leg sectionAdjustment is done manually, removable.
The angle of rotation of the section in the horizontal plane with fixation to the chair bed as an assistant table, degree0 ~ 90
Drive for changing the height of the working surface of the bedElectromechanical. Lowering the bed is carried out with an offset towards the patient.
The rate of change in the height of the working surface of the bed, m / minUp 0.3 ± 0.1
Down 0.4 ± 0.1
Changing the position of the side stops (lowering / raising), degree0 ~ 180
Foot control pedalThe foot control is IPX 8 waterproof
Electric shock protectionClass I, type B

Dimensions

Chair length, mm1340 ±20
Chair width, mm600 ±15
Chair height min. / max., mm780 ±20 / 1030 ±30
Auxiliary leg section, mm680 х 610
Base, mm940 х 470 ± 30
Volume of the tray for collecting liquid, l10
Wheel diameter, mm50
Bed weight, kg146
Safe working load, kg180

Functional features

Chair raising-lowering mechanismTelescopic column
Pelvic sectionThere is a gynecological opening
Adjustment of the pelvic and back sectionsSeparate
Stop systemThe base is adjustable in height with an assembly key, when the base is raised, the chair can be moved
Palm restsAvailable, 1 pc. on the sides of the pelvic section. Fastened with screw clamps to the side plates.
Chair mattress upholsteryThe upholstery is made using a seamless technology using durable antibacterial vinylis leather, resistant to ultraviolet radiation, disinfectants, mechanical stress.
Guide barsStainless steel x 4 on the sides of the pelvic and back sections for attaching additional components and attachments.
Goppel leg holderThe position is adjusted by loosening or tightening the clamp. Possibility to change the height, adjust the angle of inclination of the supports.