Gynecological chair-bed Welle C10

Color options

Gynecological chair-bed model Welle C10 is designed for gynecological examination, manipulation, and surgical interventions.

Adjustment of the height and position of the pelvic sections by means of an electric drive

Mechanical adjustment of the back section

Possibility of carrying out minor surgical interventions

Built-in shadowless halogen light

Complete set with sliding supports

Adjustment of the height and position of the pelvic sections by means of an electric drive

Table drive	Electric
Number of bed sections	2 sections
Back section change drive	Mechanical. Manually adjustable by means of a gas spring. The adjustment knob is located on the back-section cover.
Back section tilt angle, degree	0 ~ 75
Drive for changing the angle of inclination of the pelvic section	Electromechanical
The angle of inclination of the pelvic section, degree	0–35
Drive for changing the height of the working surface of the chair	Electromechanical.
The rate of change in the height of the working surface of the bed, mm / s	Up 4 ± 1 Down 10 ± 1
Changing the position of the armrests	Mechanical. Manually adjustable.
Angle of rotation of armrests in the horizontal plane, degree	0 ～ 180
Adjusting the foot stops	Adjustment is done manually
Angle of rotation of the footrest in the vertical plane upward, degree	0 ~ 20
Angle of rotation of the footrest in the vertical plane downward, degree	0 ~ 35
Angle of rotation of the support for the foot in the horizontal plane, degree	0 ~ 30
Tilt angle of shadowless lamp, degree	0 ~ 60
Foot control pedal	The foot control is IPX 8 waterproof
Electric shock protection	Class I, type B

Bed length, mm	1350±20
Bed width, mm	600±15
Bed height min. / max., mm	750±20 / 995±30
Auxiliary leg section, mm	550 х 550
Base, mm	925 х 416± 30
Volume of the tray for collecting liquid, l	14
Wheel diameter, mm	50
Bed weight, kg	173
Safe working load, kg	180

Chair raising-lowering mechanism	Telescopic column
Pelvic section	There is a gynecological opening
Stop system	Based on 4 wheels. The brake pedal is located at the back of the seat base.
Palm rests	Available, 1 pc. on the sides of the pelvic section. Fastened with screw clamps to the side plates.
Goppel leg holder	The position is adjusted along the guides located on the sides of the chair, by loosening or tightening the clamp. It is also possible to change the height, adjust the angle of inclination of the supports.
Chair mattress upholstery	The upholstery is made using a seamless technology using durable antibacterial vinylis leather, resistant to ultraviolet radiation, disinfectants, mechanical stress.
Guide bars	Stainless steel x 4 on the sides of the pelvic and back sections for attaching additional components and attachments.