Gynecological chair-bed
Welle B05
Color options
Gynecological chair-bed model Welle B05 is intended for obstetric and gynecological examinations, as well as for gynecological operations of various kinds.
The possibility of carrying out resuscitation measures |
Electromechanical adjustment of height, position of the dorsal and pelvic sections |
Alternative use as an operating table |
Equipped with a comfortable birthing pillow |
The presence of side tires for additional attachments |
The possibility of carrying out resuscitation measures |
Technical characteristics
Table drive | Electric |
Number of bed sections | 3 sections |
Back section change drive | Mechanical. Manually adjustable by means of a gas spring. |
Back section tilt angle, degree | 0 ~ 60 |
Actuator for changing the position of the bed of the bed (position Trendelenburg / anti-Trendelenburg) | Electromechanical |
Angle of changing the position of the bed of the bed (position Trendelenburg / anti-Trendelenburg), degree | 0 ~ 15 |
Leg section | Retractable, manually adjustable. |
Adjusting the foot stops | Manual (using a gas spring). |
Angle of rotation of the stop for the feet in the horizontal plane, degree | 0 ~ 45 |
Lift angle of the stop for the feet, degree | 0 ~ 45 |
Drive for changing the height of the working surface of the bed | Electromechanical. Lowering the bed is carried out with an offset towards the patient. |
The rate of change in the height of the working surface of the bed, mm / s | Up 9.0 ± 3 Down 10.0 ± 3 |
Foot control pedal | The foot control is IPX 8 waterproof |
Electric shock protection | Class I, type B |
Dimensions
Bed length, mm | 1350±20 |
Bed width, mm | 600±15 |
Bed height min. / max., mm | 750±20 / 995±30 |
Auxiliary leg section, mm | 550 х 550 |
Base, mm | 925 х 416± 30 |
Volume of the tray for collecting liquid, l | 14 |
Wheel diameter, mm | 50 |
Bed weight, kg | 173 |
Safe working load, kg | 180 |
Functional features
Chair raising-lowering mechanism | Telescopic column |
Pelvic section | There is a gynecological opening |
Stop system | Based on 4 wheels. The brake pedal is located at the back of the seat base. |
Palm rests | Available, 1 pc. on the sides of the pelvic section. Fastened with screw clamps to the side plates. |
Goppel leg holder | The position is adjusted along the guides located on the sides of the chair, by loosening or tightening the clamp. It is also possible to change the height, adjust the angle of inclination of the supports. |
Chair mattress upholstery | The upholstery is made using a seamless technology using durable antibacterial vinylis leather, resistant to ultraviolet radiation, disinfectants, mechanical stress. |
Guide bars | Stainless steel x 4 on the sides of the pelvic and back sections for attaching additional components and attachments. |