Main page
Request for a commercial offer
Send message Order a callback Application for equipment
 

Oxygen concentrator
Lauf G 900

  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900
  • Oxygen concentrator Lauf G 900

Send a request
to clarify the cost,
terms and delivery terms Lauf G 900


Update
 

 

Lauf G 900 oxygen concentrator produces a high concentration of 90–96% with molecular filtration of outside air.

The device is designed to provide anesthesia machines and ventilators with oxygen. This model of oxygen concentrators is intended for using only in medical hospitals (resuscitation and intensive care unit, surgical unit).

The stationary oxygen concentrator is intended for use as a source of compressed medical oxygen for supplying anesthesia and respiratory devices, artificial lung ventilation devices, oxygen inhalation systems to the pneumatic system.

The enrichment effect is based on the process of adsorptive separation of air with a molecular filter (the so-called «artificial zeolite»). The device is intended for installation in a medical facility.

Technical characteristics

Output flow, (l / min), at least20
Oxygen concentration performance (%)93±3
Oxygen outlet pressure (MPa), in the range0,14–0,40
Safety valve pressure (MPa)0,50
Operation voltage (V/Hz)~220±10%/ 50±1%
Power consumption (W)2300
Three adsorption columns
Refrigerated water separation system
Compressor engine active air cooling system
Internal receiver
Three-stage filtration systemCoarse air filter (1 level of filtration, working resource up to 100 hours)
Virus-bacterial filter (filtration level 2, working resource up to 600 hours)
Fine filter (3 filtration level, working life up to 3000 hours)
Light indication:P.O. – green light: mains supply
H.O2 – blue light: О2 concentration ≥84%
L.O2 – red light: О2 concentration <84%
L.P. — yellow light: low pressure ≤0.25 MPa
H.P. — red light: high pressure ≥0.45 MPa
H.T. — red light: high temperature inside the case ≥80 °C
Alarm:Overheating of the device (temperature ≥80 ℃)
Low outlet pressure
High outlet pressure
Low oxygen concentration at the outlet
Information displayed by LCD display:Outlet pressure
Total running time
Working time per session
Temperature inside the case

Physical characteristics

Net weight (kg)≤125
Dimensions (LхWхH), mm850 х 703 х 790